diff --git a/config/dunst/dunstrc b/config/dunst/dunstrc
old mode 100644
new mode 100755
index b337565..c1f4e40
--- a/config/dunst/dunstrc
+++ b/config/dunst/dunstrc
@@ -1 +1,413 @@
-For symlink later
+[global]
+    ### Display ###
+
+    # Which monitor should the notifications be displayed on.
+    monitor = 0
+
+    # Display notification on focused monitor.  Possible modes are:
+    #   mouse: follow mouse pointer
+    #   keyboard: follow window with keyboard focus
+    #   none: don't follow anything
+    #
+    # "keyboard" needs a window manager that exports the
+    # _NET_ACTIVE_WINDOW property.
+    # This should be the case for almost all modern window managers.
+    #
+    # If this option is set to mouse or keyboard, the monitor option
+    # will be ignored.
+    follow = mouse
+
+    # The geometry of the window:
+    #   [{width}]x{height}[+/-{x}+/-{y}]
+    # The geometry of the message window.
+    # The height is measured in number of notifications everything else
+    # in pixels.  If the width is omitted but the height is given
+    # ("-geometry x2"), the message window expands over the whole screen
+    # (dmenu-like).  If width is 0, the window expands to the longest
+    # message displayed.  A positive x is measured from the left, a
+    # negative from the right side of the screen.  Y is measured from
+    # the top and down respectively.
+    # The width can be negative.  In this case the actual width is the
+    # screen width minus the width defined in within the geometry option.
+    #geometry = "300x60+15+46"
+    width = (250, 350)
+    height = 350
+    origin = top-center
+    offset = 10x10
+
+    notification_limit = 9
+
+    # Show how many messages are currently hidden (because of geometry).
+    indicate_hidden = yes
+
+    # Shrink window if it's smaller than the width.  Will be ignored if
+    # width is 0.
+    shrink = no
+
+    # The transparency of the window.  Range: [0; 100].
+    # This option will only work if a compositing window manager is
+    # present (e.g. xcompmgr, compiz, etc.).
+    transparency = 20
+
+    # The height of the entire notification.  If the height is smaller
+    # than the font height and padding combined, it will be raised
+    # to the font height and padding.
+    notification_height = 15
+
+    # Draw a line of "separator_height" pixel height between two
+    # notifications.
+    # Set to 0 to disable.
+    separator_height = 2
+
+    # Padding between text and separator.
+    padding = 8
+
+    # Horizontal padding.
+    horizontal_padding = 8
+
+    # Defines width in pixels of frame around the notification window.
+    # Set to 0 to disable.
+    frame_width = 2
+
+    # Defines color of the frame around the notification window.
+    frame_color = "#7F8153"
+
+    # Define a color for the separator.
+    # possible values are:
+    #  * auto: dunst tries to find a color fitting to the background;
+    #  * foreground: use the same color as the foreground;
+    #  * frame: use the same color as the frame;
+    #  * anything else will be interpreted as a X color.
+    separator_color = frame
+
+    # Sort messages by urgency.
+    sort = yes
+
+    # Don't remove messages, if the user is idle (no mouse or keyboard input)
+    # for longer than idle_threshold seconds.
+    # Set to 0 to disable.
+    # A client can set the 'transient' hint to bypass this. See the rules
+    # section for how to disable this if necessary
+    idle_threshold = 120
+
+    ### Text ###
+
+    font = Fira Code Medium 12
+
+    # The spacing between lines.  If the height is smaller than the
+    # font height, it will get raised to the font height.
+    line_height = 0
+
+    # Possible values are:
+    # full: Allow a small subset of html markup in notifications:
+    #        <b>bold</b>
+    #        <i>italic</i>
+    #        <s>strikethrough</s>
+    #        <u>underline</u>
+    #
+    #        For a complete reference see
+    #        <http://developer.gnome.org/pango/stable/PangoMarkupFormat.html>.
+    #
+    # strip: This setting is provided for compatibility with some broken
+    #        clients that send markup even though it's not enabled on the
+    #        server. Dunst will try to strip the markup but the parsing is
+    #        simplistic so using this option outside of matching rules for
+    #        specific applications *IS GREATLY DISCOURAGED*.
+    #
+    # no:    Disable markup parsing, incoming notifications will be treated as
+    #        plain text. Dunst will not advertise that it has the body-markup
+    #        capability if this is set as a global setting.
+    #
+    # It's important to note that markup inside the format option will be parsed
+    # regardless of what this is set to.
+    markup = full
+
+    # The format of the message.  Possible variables are:
+    #   %a  appname
+    #   %s  summary
+    #   %b  body
+    #   %i  iconname (including its path)
+    #   %I  iconname (without its path)
+    #   %p  progress value if set ([  0%] to [100%]) or nothing
+    #   %n  progress value if set without any extra characters
+    #   %%  Literal %
+    # Markup is allowed
+    format = "<b>%s</b>\n%b"
+
+    # Alignment of message text.
+    # Possible values are "left", "center" and "right".
+    alignment = center
+
+    # Show age of message if message is older than show_age_threshold
+    # seconds.
+    # Set to -1 to disable.
+    show_age_threshold = 60
+
+    # Split notifications into multiple lines if they don't fit into
+    # geometry.
+    word_wrap = yes
+
+    # When word_wrap is set to no, specify where to make an ellipsis in long lines.
+    # Possible values are "start", "middle" and "end".
+    ellipsize = middle
+
+    # Ignore newlines '\n' in notifications.
+    ignore_newline = no
+
+    # Stack together notifications with the same content
+    stack_duplicates = true
+
+    # Hide the count of stacked notifications with the same content
+    hide_duplicate_count = false
+
+    # Display indicators for URLs (U) and actions (A).
+    show_indicators = yes
+
+    ### Icons ###
+
+    # Align icons left/right/off
+    icon_position = left
+
+    # Scale larger icons down to this size, set to 0 to disable
+    max_icon_size = 32
+
+    # Paths to default icons.
+    #icon_path = /usr/share/icons/candy-icons/apps/scalable:/usr/share/icons/candy-icons/devices/scalable/
+
+    ### History ###
+
+    # Should a notification popped up from history be sticky or timeout
+    # as if it would normally do.
+    sticky_history = yes
+
+    # Maximum amount of notifications kept in history
+    history_length = 20
+
+    ### Misc/Advanced ###
+
+    # dmenu path.
+    dmenu = /usr/bin/dmenu -p dunst:
+
+    # Browser for opening urls in context menu.
+    browser = /usr/bin/firefox -new-tab
+
+    # Always run rule-defined scripts, even if the notification is suppressed
+    always_run_script = true
+
+    # Define the title of the windows spawned by dunst
+    title = Dunst
+
+    # Define the class of the windows spawned by dunst
+    class = Dunst
+
+    # Print a notification on startup.
+    # This is mainly for error detection, since dbus (re-)starts dunst
+    # automatically after a crash.
+    startup_notification = false
+
+    # Manage dunst's desire for talking
+    # Can be one of the following values:
+    #  crit: Critical features. Dunst aborts
+    #  warn: Only non-fatal warnings
+    #  mesg: Important Messages
+    #  info: all unimportant stuff
+    # debug: all less than unimportant stuff
+    verbosity = mesg
+
+    # Define the corner radius of the notification window
+    # in pixel size. If the radius is 0, you have no rounded
+    # corners.
+    # The radius will be automatically lowered if it exceeds half of the
+    # notification height to avoid clipping text and/or icons.
+    corner_radius = 10
+
+    ### Legacy
+
+    # Use the Xinerama extension instead of RandR for multi-monitor support.
+    # This setting is provided for compatibility with older nVidia drivers that
+    # do not support RandR and using it on systems that support RandR is highly
+    # discouraged.
+    #
+    # By enabling this setting dunst will not be able to detect when a monitor
+    # is connected or disconnected which might break follow mode if the screen
+    # layout changes.
+    force_xinerama = false
+
+    ### mouse
+
+    # Defines action of mouse event
+    # Possible values are:
+    # * none: Don't do anything.
+    # * do_action: If the notification has exactly one action, or one is marked as default,
+    #              invoke it. If there are multiple and no default, open the context menu.
+    # * close_current: Close current notification.
+    # * close_all: Close all notifications.
+    mouse_left_click = do_action
+    mouse_middle_click = close_all
+    mouse_right_click = close_current
+
+# Experimental features that may or may not work correctly. Do not expect them
+# to have a consistent behaviour across releases.
+[experimental]
+    # Calculate the dpi to use on a per-monitor basis.
+    # If this setting is enabled the Xft.dpi value will be ignored and instead
+    # dunst will attempt to calculate an appropriate dpi value for each monitor
+    # using the resolution and physical size. This might be useful in setups
+    # where there are multiple screens with very different dpi values.
+    per_monitor_dpi = false
+
+[shortcuts]
+
+    # Shortcuts are specified as [modifier+][modifier+]...key
+    # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2",
+    # "mod3" and "mod4" (windows-key).
+    # Xev might be helpful to find names for keys.
+
+    # Close notification.
+    close = ctrl+space
+
+    # Close all notifications.
+    close_all = ctrl+shift+space
+
+    # Redisplay last message(s).
+    # On the US keyboard layout "grave" is normally above TAB and left
+    # of "1". Make sure this key actually exists on your keyboard layout,
+    # e.g. check output of 'xmodmap -pke'
+    history = ctrl+grave
+
+    # Context menu.
+    context = ctrl+shift+grave
+
+[urgency_low]
+    # IMPORTANT: colors have to be defined in quotation marks.
+    # Otherwise the "#" and following would be interpreted as a comment.
+    timeout = 2
+    # Icon for notifications with low urgency, uncomment to enable
+    icon = $HOME/.config/dunst/images/bell.png
+
+[urgency_normal]
+    timeout = 5
+    # Icon for notifications with normal urgency, uncomment to enable
+    icon = $HOME/.config/dunst/images/bell.png
+
+[urgency_critical]
+    timeout = 0
+    # Icon for notifications with critical urgency, uncomment to enable
+    icon = $HOME/.config/dunst/images/bell.png
+
+# Every section that isn't one of the above is interpreted as a rules to
+# override settings for certain messages.
+#
+# Messages can be matched by
+#    appname (discouraged, see desktop_entry)
+#    body
+#    category
+#    desktop_entry
+#    icon
+#    match_transient
+#    msg_urgency
+#    stack_tag
+#    summary
+#
+# and you can override the
+    background = "#080A10"
+    foreground = "#f1f1bc"
+#    format
+#    frame_color
+#    fullscreen
+#    new_icon
+#    set_stack_tag
+#    set_transient
+#    timeout
+#    urgency
+#
+# Shell-like globbing will get expanded.
+#
+# Instead of the appname filter, it's recommended to use the desktop_entry filter.
+# GLib based applications export their desktop-entry name. In comparison to the appname,
+# the desktop-entry won't get localized.
+#
+# SCRIPTING
+# You can specify a script that gets run when the rule matches by
+# setting the "script" option.
+# The script will be called as follows:
+#   script appname summary body icon urgency
+# where urgency can be "LOW", "NORMAL" or "CRITICAL".
+#
+# NOTE: if you don't want a notification to be displayed, set the format
+# to "".
+# NOTE: It might be helpful to run dunst -print in a terminal in order
+# to find fitting options for rules.
+
+# Disable the transient hint so that idle_threshold cannot be bypassed from the
+# client
+#[transient_disable]
+#    match_transient = yes
+#    set_transient = no
+#
+# Make the handling of transient notifications more strict by making them not
+# be placed in history.
+#[transient_history_ignore]
+#    match_transient = yes
+#    history_ignore = yes
+
+# fullscreen values
+# show: show the notifications, regardless if there is a fullscreen window opened
+# delay: displays the new notification, if there is no fullscreen window active
+#        If the notification is already drawn, it won't get undrawn.
+# pushback: same as delay, but when switching into fullscreen, the notification will get
+#           withdrawn from screen again and will get delayed like a new notification
+#[fullscreen_delay_everything]
+#    fullscreen = delay
+#[fullscreen_show_critical]
+#    msg_urgency = critical
+#    fullscreen = show
+
+#[espeak]
+#    summary = "*"
+#    script = dunst_espeak.sh
+
+#[script-test]
+#    summary = "*script*"
+#    script = dunst_test.sh
+
+#[ignore]
+#    # This notification will not be displayed
+#    summary = "foobar"
+#    format = ""
+
+#[history-ignore]
+#    # This notification will not be saved in history
+#    summary = "foobar"
+#    history_ignore = yes
+
+#[skip-display]
+#    # This notification will not be displayed, but will be included in the history
+#    summary = "foobar"
+#    skip_display = yes
+
+#[signed_on]
+#    appname = Pidgin
+#    summary = "*signed on*"
+#    urgency = low
+#
+#[signed_off]
+#    appname = Pidgin
+#    summary = *signed off*
+#    urgency = low
+#
+#[says]
+#    appname = Pidgin
+#    summary = *says*
+#    urgency = critical
+#
+#[twitter]
+#    appname = Pidgin
+#    summary = *twitter.com*
+#    urgency = normal
+#
+#[stack-volumes]
+#    appname = "some_volume_notifiers"
+#    set_stack_tag = "volume"
+#
+# vim: ft=cfg
diff --git a/config/dunst/images/bell.png b/config/dunst/images/bell.png
new file mode 100644
index 0000000..d9fea96
Binary files /dev/null and b/config/dunst/images/bell.png differ
diff --git a/config/dunst/images/notification.png b/config/dunst/images/notification.png
deleted file mode 100644
index 48f6e3c..0000000
Binary files a/config/dunst/images/notification.png and /dev/null differ
diff --git a/config/dunst/images/notification2.png b/config/dunst/images/notification2.png
deleted file mode 100644
index 557777d..0000000
Binary files a/config/dunst/images/notification2.png and /dev/null differ
diff --git a/config/dunst/images/notification3.png b/config/dunst/images/notification3.png
deleted file mode 100644
index 40303e2..0000000
Binary files a/config/dunst/images/notification3.png and /dev/null differ
diff --git a/config/dunst/images/notification4.png b/config/dunst/images/notification4.png
deleted file mode 100755
index 4f3a210..0000000
Binary files a/config/dunst/images/notification4.png and /dev/null differ
diff --git a/config/dunst/reload b/config/dunst/reload
deleted file mode 100755
index 9e8ee07..0000000
--- a/config/dunst/reload
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/bash
-pkill dunst
-dunst -config ~/.config/dunst/dunstrc &
-
-notify-send -u critical "Test message: critical test 1"
-notify-send -u normal "Test message: normal test 2"
-notify-send -u low "Test message: low test 3"
-notify-send -u critical "Test message: critical test 4"
-notify-send -u normal "Test message: normal test 5"
-notify-send -u low "Test message: low test 6"
-notify-send -u critical "Test message: critical test 7"
-notify-send -u normal "Test message: normal test 8"
-notify-send -u low "Test message: low test 9"
diff --git a/config/dunst/styles/dunstrc-dark b/config/dunst/styles/dunstrc-dark
deleted file mode 100755
index c7fa390..0000000
--- a/config/dunst/styles/dunstrc-dark
+++ /dev/null
@@ -1,422 +0,0 @@
-[global]
-    ### Display ###
-
-    # Which monitor should the notifications be displayed on.
-    monitor = 0
-
-    # Display notification on focused monitor.  Possible modes are:
-    #   mouse: follow mouse pointer
-    #   keyboard: follow window with keyboard focus
-    #   none: don't follow anything
-    #
-    # "keyboard" needs a window manager that exports the
-    # _NET_ACTIVE_WINDOW property.
-    # This should be the case for almost all modern window managers.
-    #
-    # If this option is set to mouse or keyboard, the monitor option
-    # will be ignored.
-    follow = mouse
-
-    # The geometry of the window:
-    #   [{width}]x{height}[+/-{x}+/-{y}]
-    # The geometry of the message window.
-    # The height is measured in number of notifications everything else
-    # in pixels.  If the width is omitted but the height is given
-    # ("-geometry x2"), the message window expands over the whole screen
-    # (dmenu-like).  If width is 0, the window expands to the longest
-    # message displayed.  A positive x is measured from the left, a
-    # negative from the right side of the screen.  Y is measured from
-    # the top and down respectively.
-    # The width can be negative.  In this case the actual width is the
-    # screen width minus the width defined in within the geometry option.
-    #geometry = "300x60+15+46"
-    width = (250, 350)
-    height = 350
-    origin = top-center
-    offset = 10x10
-
-    notification_limit = 9
-
-    # Show how many messages are currently hidden (because of geometry).
-    indicate_hidden = yes
-
-    # Shrink window if it's smaller than the width.  Will be ignored if
-    # width is 0.
-    shrink = no
-
-    # The transparency of the window.  Range: [0; 100].
-    # This option will only work if a compositing window manager is
-    # present (e.g. xcompmgr, compiz, etc.).
-    transparency = 20
-
-    # The height of the entire notification.  If the height is smaller
-    # than the font height and padding combined, it will be raised
-    # to the font height and padding.
-    notification_height = 15
-
-    # Draw a line of "separator_height" pixel height between two
-    # notifications.
-    # Set to 0 to disable.
-    separator_height = 2
-
-    # Padding between text and separator.
-    padding = 8
-
-    # Horizontal padding.
-    horizontal_padding = 8
-
-    # Defines width in pixels of frame around the notification window.
-    # Set to 0 to disable.
-    frame_width = 1
-
-    # Defines color of the frame around the notification window.
-    frame_color = "#cdd6f4"
-
-    # Define a color for the separator.
-    # possible values are:
-    #  * auto: dunst tries to find a color fitting to the background;
-    #  * foreground: use the same color as the foreground;
-    #  * frame: use the same color as the frame;
-    #  * anything else will be interpreted as a X color.
-    separator_color = frame
-
-    # Sort messages by urgency.
-    sort = yes
-
-    # Don't remove messages, if the user is idle (no mouse or keyboard input)
-    # for longer than idle_threshold seconds.
-    # Set to 0 to disable.
-    # A client can set the 'transient' hint to bypass this. See the rules
-    # section for how to disable this if necessary
-    idle_threshold = 120
-
-    ### Text ###
-
-    font = Fira Code Medium 12
-
-    # The spacing between lines.  If the height is smaller than the
-    # font height, it will get raised to the font height.
-    line_height = 0
-
-    # Possible values are:
-    # full: Allow a small subset of html markup in notifications:
-    #        <b>bold</b>
-    #        <i>italic</i>
-    #        <s>strikethrough</s>
-    #        <u>underline</u>
-    #
-    #        For a complete reference see
-    #        <http://developer.gnome.org/pango/stable/PangoMarkupFormat.html>.
-    #
-    # strip: This setting is provided for compatibility with some broken
-    #        clients that send markup even though it's not enabled on the
-    #        server. Dunst will try to strip the markup but the parsing is
-    #        simplistic so using this option outside of matching rules for
-    #        specific applications *IS GREATLY DISCOURAGED*.
-    #
-    # no:    Disable markup parsing, incoming notifications will be treated as
-    #        plain text. Dunst will not advertise that it has the body-markup
-    #        capability if this is set as a global setting.
-    #
-    # It's important to note that markup inside the format option will be parsed
-    # regardless of what this is set to.
-    markup = full
-
-    # The format of the message.  Possible variables are:
-    #   %a  appname
-    #   %s  summary
-    #   %b  body
-    #   %i  iconname (including its path)
-    #   %I  iconname (without its path)
-    #   %p  progress value if set ([  0%] to [100%]) or nothing
-    #   %n  progress value if set without any extra characters
-    #   %%  Literal %
-    # Markup is allowed
-    format = "<b>%s</b>\n%b"
-
-    # Alignment of message text.
-    # Possible values are "left", "center" and "right".
-    alignment = center
-
-    # Show age of message if message is older than show_age_threshold
-    # seconds.
-    # Set to -1 to disable.
-    show_age_threshold = 60
-
-    # Split notifications into multiple lines if they don't fit into
-    # geometry.
-    word_wrap = yes
-
-    # When word_wrap is set to no, specify where to make an ellipsis in long lines.
-    # Possible values are "start", "middle" and "end".
-    ellipsize = middle
-
-    # Ignore newlines '\n' in notifications.
-    ignore_newline = no
-
-    # Stack together notifications with the same content
-    stack_duplicates = true
-
-    # Hide the count of stacked notifications with the same content
-    hide_duplicate_count = false
-
-    # Display indicators for URLs (U) and actions (A).
-    show_indicators = yes
-
-    ### Icons ###
-
-    # Align icons left/right/off
-    icon_position = left
-
-    # Scale larger icons down to this size, set to 0 to disable
-    max_icon_size = 32
-
-    # Paths to default icons.
-    #icon_path = /usr/share/icons/candy-icons/apps/scalable:/usr/share/icons/candy-icons/devices/scalable/
-
-    ### History ###
-
-    # Should a notification popped up from history be sticky or timeout
-    # as if it would normally do.
-    sticky_history = yes
-
-    # Maximum amount of notifications kept in history
-    history_length = 20
-
-    ### Misc/Advanced ###
-
-    # dmenu path.
-    dmenu = /usr/bin/dmenu -p dunst:
-
-    # Browser for opening urls in context menu.
-    browser = /usr/bin/firefox -new-tab
-
-    # Always run rule-defined scripts, even if the notification is suppressed
-    always_run_script = true
-
-    # Define the title of the windows spawned by dunst
-    title = Dunst
-
-    # Define the class of the windows spawned by dunst
-    class = Dunst
-
-    # Print a notification on startup.
-    # This is mainly for error detection, since dbus (re-)starts dunst
-    # automatically after a crash.
-    startup_notification = false
-
-    # Manage dunst's desire for talking
-    # Can be one of the following values:
-    #  crit: Critical features. Dunst aborts
-    #  warn: Only non-fatal warnings
-    #  mesg: Important Messages
-    #  info: all unimportant stuff
-    # debug: all less than unimportant stuff
-    verbosity = mesg
-
-    # Define the corner radius of the notification window
-    # in pixel size. If the radius is 0, you have no rounded
-    # corners.
-    # The radius will be automatically lowered if it exceeds half of the
-    # notification height to avoid clipping text and/or icons.
-    corner_radius = 8
-
-    ### Legacy
-
-    # Use the Xinerama extension instead of RandR for multi-monitor support.
-    # This setting is provided for compatibility with older nVidia drivers that
-    # do not support RandR and using it on systems that support RandR is highly
-    # discouraged.
-    #
-    # By enabling this setting dunst will not be able to detect when a monitor
-    # is connected or disconnected which might break follow mode if the screen
-    # layout changes.
-    force_xinerama = false
-
-    ### mouse
-
-    # Defines action of mouse event
-    # Possible values are:
-    # * none: Don't do anything.
-    # * do_action: If the notification has exactly one action, or one is marked as default,
-    #              invoke it. If there are multiple and no default, open the context menu.
-    # * close_current: Close current notification.
-    # * close_all: Close all notifications.
-    mouse_left_click = do_action
-    mouse_middle_click = close_all
-    mouse_right_click = close_current
-
-# Experimental features that may or may not work correctly. Do not expect them
-# to have a consistent behaviour across releases.
-[experimental]
-    # Calculate the dpi to use on a per-monitor basis.
-    # If this setting is enabled the Xft.dpi value will be ignored and instead
-    # dunst will attempt to calculate an appropriate dpi value for each monitor
-    # using the resolution and physical size. This might be useful in setups
-    # where there are multiple screens with very different dpi values.
-    per_monitor_dpi = false
-
-[shortcuts]
-
-    # Shortcuts are specified as [modifier+][modifier+]...key
-    # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2",
-    # "mod3" and "mod4" (windows-key).
-    # Xev might be helpful to find names for keys.
-
-    # Close notification.
-    close = ctrl+space
-
-    # Close all notifications.
-    close_all = ctrl+shift+space
-
-    # Redisplay last message(s).
-    # On the US keyboard layout "grave" is normally above TAB and left
-    # of "1". Make sure this key actually exists on your keyboard layout,
-    # e.g. check output of 'xmodmap -pke'
-    history = ctrl+grave
-
-    # Context menu.
-    context = ctrl+shift+grave
-
-[urgency_low]
-    # IMPORTANT: colors have to be defined in quotation marks.
-    # Otherwise the "#" and following would be interpreted as a comment.
-    background = "#1e1e2e"
-    foreground = "#cdd6f4"
-    #frame_color = "#2c2c2c"
-    timeout = 2
-    # Icon for notifications with low urgency, uncomment to enable
-    icon = ~/.config/hypr/dunst/images/notification.png
-
-[urgency_normal]
-    background = "#1e1e2e"
-    foreground = "#cdd6f4"
-    #frame_color = "#2c2c2c"
-    timeout = 5
-    # Icon for notifications with normal urgency, uncomment to enable
-    icon = ~/.config/hypr/dunst/images/notification.png
-
-[urgency_critical]
-    background = "#131313"
-    foreground = "#f5cb42"
-    frame_color = "#f38ba8"
-    timeout = 0
-    # Icon for notifications with critical urgency, uncomment to enable
-    icon = ~/.config/hypr/dunst/images/notification.png
-
-# Every section that isn't one of the above is interpreted as a rules to
-# override settings for certain messages.
-#
-# Messages can be matched by
-#    appname (discouraged, see desktop_entry)
-#    body
-#    category
-#    desktop_entry
-#    icon
-#    match_transient
-#    msg_urgency
-#    stack_tag
-#    summary
-#
-# and you can override the
-#    background = "#1e1e2e"
-#    foreground
-#    format
-#    frame_color
-#    fullscreen
-#    new_icon
-#    set_stack_tag
-#    set_transient
-#    timeout
-#    urgency
-#
-# Shell-like globbing will get expanded.
-#
-# Instead of the appname filter, it's recommended to use the desktop_entry filter.
-# GLib based applications export their desktop-entry name. In comparison to the appname,
-# the desktop-entry won't get localized.
-#
-# SCRIPTING
-# You can specify a script that gets run when the rule matches by
-# setting the "script" option.
-# The script will be called as follows:
-#   script appname summary body icon urgency
-# where urgency can be "LOW", "NORMAL" or "CRITICAL".
-#
-# NOTE: if you don't want a notification to be displayed, set the format
-# to "".
-# NOTE: It might be helpful to run dunst -print in a terminal in order
-# to find fitting options for rules.
-
-# Disable the transient hint so that idle_threshold cannot be bypassed from the
-# client
-#[transient_disable]
-#    match_transient = yes
-#    set_transient = no
-#
-# Make the handling of transient notifications more strict by making them not
-# be placed in history.
-#[transient_history_ignore]
-#    match_transient = yes
-#    history_ignore = yes
-
-# fullscreen values
-# show: show the notifications, regardless if there is a fullscreen window opened
-# delay: displays the new notification, if there is no fullscreen window active
-#        If the notification is already drawn, it won't get undrawn.
-# pushback: same as delay, but when switching into fullscreen, the notification will get
-#           withdrawn from screen again and will get delayed like a new notification
-#[fullscreen_delay_everything]
-#    fullscreen = delay
-#[fullscreen_show_critical]
-#    msg_urgency = critical
-#    fullscreen = show
-
-#[espeak]
-#    summary = "*"
-#    script = dunst_espeak.sh
-
-#[script-test]
-#    summary = "*script*"
-#    script = dunst_test.sh
-
-#[ignore]
-#    # This notification will not be displayed
-#    summary = "foobar"
-#    format = ""
-
-#[history-ignore]
-#    # This notification will not be saved in history
-#    summary = "foobar"
-#    history_ignore = yes
-
-#[skip-display]
-#    # This notification will not be displayed, but will be included in the history
-#    summary = "foobar"
-#    skip_display = yes
-
-#[signed_on]
-#    appname = Pidgin
-#    summary = "*signed on*"
-#    urgency = low
-#
-#[signed_off]
-#    appname = Pidgin
-#    summary = *signed off*
-#    urgency = low
-#
-#[says]
-#    appname = Pidgin
-#    summary = *says*
-#    urgency = critical
-#
-#[twitter]
-#    appname = Pidgin
-#    summary = *twitter.com*
-#    urgency = normal
-#
-#[stack-volumes]
-#    appname = "some_volume_notifiers"
-#    set_stack_tag = "volume"
-#
-# vim: ft=cfg
diff --git a/config/dunst/styles/dunstrc-light b/config/dunst/styles/dunstrc-light
deleted file mode 100755
index 2ba902d..0000000
--- a/config/dunst/styles/dunstrc-light
+++ /dev/null
@@ -1,422 +0,0 @@
-[global]
-    ### Display ###
-
-    # Which monitor should the notifications be displayed on.
-    monitor = 0
-
-    # Display notification on focused monitor.  Possible modes are:
-    #   mouse: follow mouse pointer
-    #   keyboard: follow window with keyboard focus
-    #   none: don't follow anything
-    #
-    # "keyboard" needs a window manager that exports the
-    # _NET_ACTIVE_WINDOW property.
-    # This should be the case for almost all modern window managers.
-    #
-    # If this option is set to mouse or keyboard, the monitor option
-    # will be ignored.
-    follow = mouse
-
-    # The geometry of the window:
-    #   [{width}]x{height}[+/-{x}+/-{y}]
-    # The geometry of the message window.
-    # The height is measured in number of notifications everything else
-    # in pixels.  If the width is omitted but the height is given
-    # ("-geometry x2"), the message window expands over the whole screen
-    # (dmenu-like).  If width is 0, the window expands to the longest
-    # message displayed.  A positive x is measured from the left, a
-    # negative from the right side of the screen.  Y is measured from
-    # the top and down respectively.
-    # The width can be negative.  In this case the actual width is the
-    # screen width minus the width defined in within the geometry option.
-    #geometry = "300x60+15+46"
-    width = (250, 350)
-    height = 350
-    origin = top-center
-    offset = 10x10
-
-    notification_limit = 9
-
-    # Show how many messages are currently hidden (because of geometry).
-    indicate_hidden = yes
-
-    # Shrink window if it's smaller than the width.  Will be ignored if
-    # width is 0.
-    shrink = no
-
-    # The transparency of the window.  Range: [0; 100].
-    # This option will only work if a compositing window manager is
-    # present (e.g. xcompmgr, compiz, etc.).
-    transparency = 20
-
-    # The height of the entire notification.  If the height is smaller
-    # than the font height and padding combined, it will be raised
-    # to the font height and padding.
-    notification_height = 15
-
-    # Draw a line of "separator_height" pixel height between two
-    # notifications.
-    # Set to 0 to disable.
-    separator_height = 2
-
-    # Padding between text and separator.
-    padding = 8
-
-    # Horizontal padding.
-    horizontal_padding = 8
-
-    # Defines width in pixels of frame around the notification window.
-    # Set to 0 to disable.
-    frame_width = 1
-
-    # Defines color of the frame around the notification window.
-    frame_color = "#313244"
-
-    # Define a color for the separator.
-    # possible values are:
-    #  * auto: dunst tries to find a color fitting to the background;
-    #  * foreground: use the same color as the foreground;
-    #  * frame: use the same color as the frame;
-    #  * anything else will be interpreted as a X color.
-    separator_color = frame
-
-    # Sort messages by urgency.
-    sort = yes
-
-    # Don't remove messages, if the user is idle (no mouse or keyboard input)
-    # for longer than idle_threshold seconds.
-    # Set to 0 to disable.
-    # A client can set the 'transient' hint to bypass this. See the rules
-    # section for how to disable this if necessary
-    idle_threshold = 120
-
-    ### Text ###
-
-    font = Fira Code Medium 12
-
-    # The spacing between lines.  If the height is smaller than the
-    # font height, it will get raised to the font height.
-    line_height = 0
-
-    # Possible values are:
-    # full: Allow a small subset of html markup in notifications:
-    #        <b>bold</b>
-    #        <i>italic</i>
-    #        <s>strikethrough</s>
-    #        <u>underline</u>
-    #
-    #        For a complete reference see
-    #        <http://developer.gnome.org/pango/stable/PangoMarkupFormat.html>.
-    #
-    # strip: This setting is provided for compatibility with some broken
-    #        clients that send markup even though it's not enabled on the
-    #        server. Dunst will try to strip the markup but the parsing is
-    #        simplistic so using this option outside of matching rules for
-    #        specific applications *IS GREATLY DISCOURAGED*.
-    #
-    # no:    Disable markup parsing, incoming notifications will be treated as
-    #        plain text. Dunst will not advertise that it has the body-markup
-    #        capability if this is set as a global setting.
-    #
-    # It's important to note that markup inside the format option will be parsed
-    # regardless of what this is set to.
-    markup = full
-
-    # The format of the message.  Possible variables are:
-    #   %a  appname
-    #   %s  summary
-    #   %b  body
-    #   %i  iconname (including its path)
-    #   %I  iconname (without its path)
-    #   %p  progress value if set ([  0%] to [100%]) or nothing
-    #   %n  progress value if set without any extra characters
-    #   %%  Literal %
-    # Markup is allowed
-    format = "<b>%s</b>\n%b"
-
-    # Alignment of message text.
-    # Possible values are "left", "center" and "right".
-    alignment = center
-
-    # Show age of message if message is older than show_age_threshold
-    # seconds.
-    # Set to -1 to disable.
-    show_age_threshold = 60
-
-    # Split notifications into multiple lines if they don't fit into
-    # geometry.
-    word_wrap = yes
-
-    # When word_wrap is set to no, specify where to make an ellipsis in long lines.
-    # Possible values are "start", "middle" and "end".
-    ellipsize = middle
-
-    # Ignore newlines '\n' in notifications.
-    ignore_newline = no
-
-    # Stack together notifications with the same content
-    stack_duplicates = true
-
-    # Hide the count of stacked notifications with the same content
-    hide_duplicate_count = false
-
-    # Display indicators for URLs (U) and actions (A).
-    show_indicators = yes
-
-    ### Icons ###
-
-    # Align icons left/right/off
-    icon_position = left
-
-    # Scale larger icons down to this size, set to 0 to disable
-    max_icon_size = 32
-
-    # Paths to default icons.
-    #icon_path = /usr/share/icons/candy-icons/apps/scalable:/usr/share/icons/candy-icons/devices/scalable/
-
-    ### History ###
-
-    # Should a notification popped up from history be sticky or timeout
-    # as if it would normally do.
-    sticky_history = yes
-
-    # Maximum amount of notifications kept in history
-    history_length = 20
-
-    ### Misc/Advanced ###
-
-    # dmenu path.
-    dmenu = /usr/bin/dmenu -p dunst:
-
-    # Browser for opening urls in context menu.
-    browser = /usr/bin/firefox -new-tab
-
-    # Always run rule-defined scripts, even if the notification is suppressed
-    always_run_script = true
-
-    # Define the title of the windows spawned by dunst
-    title = Dunst
-
-    # Define the class of the windows spawned by dunst
-    class = Dunst
-
-    # Print a notification on startup.
-    # This is mainly for error detection, since dbus (re-)starts dunst
-    # automatically after a crash.
-    startup_notification = false
-
-    # Manage dunst's desire for talking
-    # Can be one of the following values:
-    #  crit: Critical features. Dunst aborts
-    #  warn: Only non-fatal warnings
-    #  mesg: Important Messages
-    #  info: all unimportant stuff
-    # debug: all less than unimportant stuff
-    verbosity = mesg
-
-    # Define the corner radius of the notification window
-    # in pixel size. If the radius is 0, you have no rounded
-    # corners.
-    # The radius will be automatically lowered if it exceeds half of the
-    # notification height to avoid clipping text and/or icons.
-    corner_radius = 8
-
-    ### Legacy
-
-    # Use the Xinerama extension instead of RandR for multi-monitor support.
-    # This setting is provided for compatibility with older nVidia drivers that
-    # do not support RandR and using it on systems that support RandR is highly
-    # discouraged.
-    #
-    # By enabling this setting dunst will not be able to detect when a monitor
-    # is connected or disconnected which might break follow mode if the screen
-    # layout changes.
-    force_xinerama = false
-
-    ### mouse
-
-    # Defines action of mouse event
-    # Possible values are:
-    # * none: Don't do anything.
-    # * do_action: If the notification has exactly one action, or one is marked as default,
-    #              invoke it. If there are multiple and no default, open the context menu.
-    # * close_current: Close current notification.
-    # * close_all: Close all notifications.
-    mouse_left_click = do_action
-    mouse_middle_click = close_all
-    mouse_right_click = close_current
-
-# Experimental features that may or may not work correctly. Do not expect them
-# to have a consistent behaviour across releases.
-[experimental]
-    # Calculate the dpi to use on a per-monitor basis.
-    # If this setting is enabled the Xft.dpi value will be ignored and instead
-    # dunst will attempt to calculate an appropriate dpi value for each monitor
-    # using the resolution and physical size. This might be useful in setups
-    # where there are multiple screens with very different dpi values.
-    per_monitor_dpi = false
-
-[shortcuts]
-
-    # Shortcuts are specified as [modifier+][modifier+]...key
-    # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2",
-    # "mod3" and "mod4" (windows-key).
-    # Xev might be helpful to find names for keys.
-
-    # Close notification.
-    close = ctrl+space
-
-    # Close all notifications.
-    close_all = ctrl+shift+space
-
-    # Redisplay last message(s).
-    # On the US keyboard layout "grave" is normally above TAB and left
-    # of "1". Make sure this key actually exists on your keyboard layout,
-    # e.g. check output of 'xmodmap -pke'
-    history = ctrl+grave
-
-    # Context menu.
-    context = ctrl+shift+grave
-
-[urgency_low]
-    # IMPORTANT: colors have to be defined in quotation marks.
-    # Otherwise the "#" and following would be interpreted as a comment.
-    background = "#e7e7ec"
-    foreground = "#1e1e2e"
-    #frame_color = "#2c2c2c"
-    timeout = 2
-    # Icon for notifications with low urgency, uncomment to enable
-    icon = ~/.config/hypr/dunst/images/notification2.png
-
-[urgency_normal]
-    background = "#e7e7ec"
-    foreground = "#1e1e2e"
-    #frame_color = "#2c2c2c"
-    timeout = 5
-    # Icon for notifications with normal urgency, uncomment to enable
-    icon = ~/.config/hypr/dunst/images/notification2.png
-
-[urgency_critical]
-    background = "#e7e7ec"
-    foreground = "#f5cb42"
-    frame_color = "#f38ba8"
-    timeout = 0
-    # Icon for notifications with critical urgency, uncomment to enable
-    icon = ~/.config/hypr/dunst/images/notification2.png
-
-# Every section that isn't one of the above is interpreted as a rules to
-# override settings for certain messages.
-#
-# Messages can be matched by
-#    appname (discouraged, see desktop_entry)
-#    body
-#    category
-#    desktop_entry
-#    icon
-#    match_transient
-#    msg_urgency
-#    stack_tag
-#    summary
-#
-# and you can override the
-#    background = "#e7e7ec"
-#    foreground
-#    format
-#    frame_color
-#    fullscreen
-#    new_icon
-#    set_stack_tag
-#    set_transient
-#    timeout
-#    urgency
-#
-# Shell-like globbing will get expanded.
-#
-# Instead of the appname filter, it's recommended to use the desktop_entry filter.
-# GLib based applications export their desktop-entry name. In comparison to the appname,
-# the desktop-entry won't get localized.
-#
-# SCRIPTING
-# You can specify a script that gets run when the rule matches by
-# setting the "script" option.
-# The script will be called as follows:
-#   script appname summary body icon urgency
-# where urgency can be "LOW", "NORMAL" or "CRITICAL".
-#
-# NOTE: if you don't want a notification to be displayed, set the format
-# to "".
-# NOTE: It might be helpful to run dunst -print in a terminal in order
-# to find fitting options for rules.
-
-# Disable the transient hint so that idle_threshold cannot be bypassed from the
-# client
-#[transient_disable]
-#    match_transient = yes
-#    set_transient = no
-#
-# Make the handling of transient notifications more strict by making them not
-# be placed in history.
-#[transient_history_ignore]
-#    match_transient = yes
-#    history_ignore = yes
-
-# fullscreen values
-# show: show the notifications, regardless if there is a fullscreen window opened
-# delay: displays the new notification, if there is no fullscreen window active
-#        If the notification is already drawn, it won't get undrawn.
-# pushback: same as delay, but when switching into fullscreen, the notification will get
-#           withdrawn from screen again and will get delayed like a new notification
-#[fullscreen_delay_everything]
-#    fullscreen = delay
-#[fullscreen_show_critical]
-#    msg_urgency = critical
-#    fullscreen = show
-
-#[espeak]
-#    summary = "*"
-#    script = dunst_espeak.sh
-
-#[script-test]
-#    summary = "*script*"
-#    script = dunst_test.sh
-
-#[ignore]
-#    # This notification will not be displayed
-#    summary = "foobar"
-#    format = ""
-
-#[history-ignore]
-#    # This notification will not be saved in history
-#    summary = "foobar"
-#    history_ignore = yes
-
-#[skip-display]
-#    # This notification will not be displayed, but will be included in the history
-#    summary = "foobar"
-#    skip_display = yes
-
-#[signed_on]
-#    appname = Pidgin
-#    summary = "*signed on*"
-#    urgency = low
-#
-#[signed_off]
-#    appname = Pidgin
-#    summary = *signed off*
-#    urgency = low
-#
-#[says]
-#    appname = Pidgin
-#    summary = *says*
-#    urgency = critical
-#
-#[twitter]
-#    appname = Pidgin
-#    summary = *twitter.com*
-#    urgency = normal
-#
-#[stack-volumes]
-#    appname = "some_volume_notifiers"
-#    set_stack_tag = "volume"
-#
-# vim: ft=cfg
diff --git a/config/hypr/configs/Execs.conf b/config/hypr/configs/Execs.conf
index 2cf5946..478eac2 100644
--- a/config/hypr/configs/Execs.conf
+++ b/config/hypr/configs/Execs.conf
@@ -10,7 +10,7 @@ exec-once = $HOME/.config/hypr/initial-boot.sh
 
 # wallpaper stuff
 exec-once = swww query || swww init 
-exec-once = $SwwwRandom $WallpaperPath # random wallpaper switcher every 5 minutes
+exec-once = $SwwwRandom $WallpaperPath # random wallpaper switcher every 15 minutes
 #exec-once = swww query || swww init && swww img $HOME/Pictures/wallpapers/mecha-nostalgia.png  # persistent wallpaper
 
 # Startup
diff --git a/config/hypr/scripts/Brightness.sh b/config/hypr/scripts/Brightness.sh
index 72cff89..c5c0b80 100755
--- a/config/hypr/scripts/Brightness.sh
+++ b/config/hypr/scripts/Brightness.sh
@@ -26,7 +26,7 @@ get_icon() {
 
 # Notify
 notify_user() {
-	notify-send -h string:x-dunst-stack-tag:brightness_notif -h int:value:$current -u low -i "$icon" "Brightness : $current%"
+	dunstify -h string:x-dunst-stack-tag:brightness_notif -h int:value:$current -u low -i "$icon" "Brightness : $current%"
 }
 
 # Change brightness
diff --git a/config/hypr/scripts/DarkLight.sh b/config/hypr/scripts/DarkLight.sh
index 53e1c7d..3c32778 100755
--- a/config/hypr/scripts/DarkLight.sh
+++ b/config/hypr/scripts/DarkLight.sh
@@ -4,12 +4,13 @@ set -x
 wallpaper_path="$HOME/Pictures/wallpapers/Dynamic-Wallpapers"
 hypr_config_path="$HOME/.config/hypr"
 waybar_config="$HOME/.config/waybar"
-dunst_config="$HOME/.config/dunst"
+SCRIPTSDIR="$HOME/.config/hypr/scripts"
+dunst_notif="$HOME/.config/dunst/images/bell.png"
+
 
 dark_rofi_pywal="$HOME/.cache/wal/colors-rofi-dark.rasi"
 light_rofi_pywal="$HOME/.cache/wal/colors-rofi-light.rasi"
 
-
 # Tokyo Night
 light_gtk_theme="Tokyonight-Light-B"
 dark_gtk_theme="Tokyonight-Dark-B"
@@ -25,9 +26,9 @@ swww query || swww init
 swww="swww img"
 effect="--transition-bezier .43,1.19,1,.4 --transition-fps 60 --transition-type grow --transition-pos 0.925,0.977 --transition-duration 2"
 
-# Define functions for notifying user and updating symlinks
+
 notify_user() {
-	notify-send -h string:x-canonical-private-synchronous:sys-notify -u normal "Switching to $1 mode"
+    dunstify -u normal -i "$dunst_notif" "Switching to $1 mode"
 }
 
 # Determine the current wallpaper mode by checking a configuration file
@@ -41,8 +42,6 @@ fi
 path_param=$(echo $next_mode | sed 's/.*/\u&/')
 
 notify_user "$next_mode"
-#ln -sf "${waybar_config}/style/style-pywal.css" "${waybar_config}/style.css"
-ln -sf "${dunst_config}/styles/dunstrc-${next_mode}" "${dunst_config}/dunstrc"
 
 # Symlink for rofi theme
 if [ "$next_mode" = "dark" ]; then
@@ -71,6 +70,8 @@ $swww "${next_wallpaper}" $effect
 echo "$next_mode" > ~/.cache/.wallpaper_mode
 echo "$next_wallpaper" > ~/.cache/.current_wallpaper
 
-exec ~/.config/hypr/scripts/PywalSwww.sh &
+${SCRIPTSDIR}/PywalSwww.sh &
 sleep 2
-exec ~/.config/hypr/scripts/Refresh.sh &
\ No newline at end of file
+${SCRIPTSDIR}/Refresh.sh &
+sleep 1
+${SCRIPTSDIR}/PywalDunst.sh
\ No newline at end of file
diff --git a/config/hypr/scripts/PywalDunst.sh b/config/hypr/scripts/PywalDunst.sh
new file mode 100755
index 0000000..410c55b
--- /dev/null
+++ b/config/hypr/scripts/PywalDunst.sh
@@ -0,0 +1,24 @@
+#!/bin/sh
+
+#        -lf/nf/cf color
+#            Defines the foreground color for low, normal and critical notifications respectively.
+#
+#        -lb/nb/cb color
+#            Defines the background color for low, normal and critical notifications respectively.
+#
+#        -lfr/nfr/cfr color
+#            Defines the frame color for low, normal and critical notifications respectively.
+
+[ -f "$HOME/.cache/wal/colors.sh" ] && . "$HOME/.cache/wal/colors.sh"
+
+pidof dunst && pkill dunst 
+
+DUNST_FILE=$HOME/.config/dunst/dunstrc
+
+# update dunst based on pywal colors.
+sed -i '/background = /s/.*/    background = "'$color0'"/' $DUNST_FILE
+sed -i '/foreground = /s/.*/    foreground = "'$color7'"/' $DUNST_FILE
+sed -i '/frame_color = /s/.*/    frame_color = "'$color2'"/' $DUNST_FILE
+
+
+dunst -conf $HOME/.config/dunst/dunstrc > /dev/null 2>&1 &
\ No newline at end of file
diff --git a/config/hypr/scripts/PywalSwww.sh b/config/hypr/scripts/PywalSwww.sh
index 2a18122..db4d706 100755
--- a/config/hypr/scripts/PywalSwww.sh
+++ b/config/hypr/scripts/PywalSwww.sh
@@ -28,6 +28,6 @@ done
 wal -i $wallpaper_path
 
 # execute pywal skipping tty and terminal
-#wal -i $wallpaper_path -s -t
+#wal -i $wallpaper_path -s -t &
 
-# more info regarding Pywal https://github.com/dylanaraps/pywal/wiki/Getting-Started
\ No newline at end of file
+# more info regarding Pywal https://github.com/dylanaraps/pywal/wiki/Getting-Started
diff --git a/config/hypr/scripts/Refresh.sh b/config/hypr/scripts/Refresh.sh
index 3037458..d1b8592 100755
--- a/config/hypr/scripts/Refresh.sh
+++ b/config/hypr/scripts/Refresh.sh
@@ -3,16 +3,16 @@
 SCRIPTSDIR=$HOME/.config/hypr/scripts
 
 # Kill already running processes
-_ps=(waybar dunst rofi)
+_ps=(waybar rofi)
 for _prs in "${_ps[@]}"; do
     if pidof "${_prs}" >/dev/null; then
         pkill "${_prs}"
     fi
 done
 
-# relaunch apps
-dunst &
+# Relaunch waybar
 waybar &
 
+## trying to figure out how to restart Rainbow borders
 #sleep 1
 #${SCRIPTSDIR}/RainbowBorders.sh &
\ No newline at end of file
diff --git a/config/hypr/scripts/Volume.sh b/config/hypr/scripts/Volume.sh
index c5eab80..a51999d 100755
--- a/config/hypr/scripts/Volume.sh
+++ b/config/hypr/scripts/Volume.sh
@@ -24,8 +24,7 @@ get_icon() {
 
 # Notify
 notify_user() {
-#	notify-send -h string:x-canonical-private-synchronous:sys-notify -u normal -i "$(get_icon)" "Volume : $(get_volume) %"
-	notify-send -h int:value:$(get_volume) -h "string:x-dunst-stack-tag:volume_notif" -u low -i "$(get_icon)" "Volume : $(get_volume) %"
+	dunstify -h int:value:$(get_volume) -h "string:x-dunst-stack-tag:volume_notif" -u low -i "$(get_icon)" "Volume : $(get_volume) %"
 
 }
 
@@ -71,8 +70,7 @@ get_mic_icon() {
 }
 # Notify
 notify_mic_user() {
-#	notify-send -h string:x-canonical-private-synchronous:sys-notify -u low -i "$(get_mic_icon)" "Mic-Level : $(pamixer --default-source --get-volume) %"
-	notify-send -h int:value:$(pamixer --default-source --get-volume) -h "string:x-dunst-stack-tag:volume_notif" -u low -i "$(get_mic_icon)" "Mic-Level : $(pamixer --default-source --get-volume) %"
+	dunstify -h int:value:$(pamixer --default-source --get-volume) -h "string:x-dunst-stack-tag:volume_notif" -u low -i "$(get_mic_icon)" "Mic-Level : $(pamixer --default-source --get-volume) %"
 }
 
 # Increase MIC Volume
diff --git a/config/hypr/scripts/Wallpaper.sh b/config/hypr/scripts/Wallpaper.sh
index d5ea464..5250264 100755
--- a/config/hypr/scripts/Wallpaper.sh
+++ b/config/hypr/scripts/Wallpaper.sh
@@ -1,12 +1,18 @@
 #!/bin/bash
 
-DIR=$HOME/Pictures/wallpapers/
+DIR="$HOME/Pictures/wallpapers/"
+SCRIPTSDIR="$HOME/.config/hypr/scripts"
+
 PICS=($(find ${DIR} -type f \( -name "*.jpg" -o -name "*.jpeg" -o -name "*.png" -o -name "*.gif" \)))
 RANDOMPICS=${PICS[ $RANDOM % ${#PICS[@]} ]}
 
 swww query || swww init
 swww img ${RANDOMPICS} --transition-fps 30 --transition-type any --transition-duration 3
 
-exec $HOME/.config/hypr/scripts/PywalSwww.sh &
+
+
+${SCRIPTSDIR}/PywalSwww.sh &
+sleep 1
+${SCRIPTSDIR}/Refresh.sh &
 sleep 1
-exec $HOME/.config/hypr/scripts/Refresh.sh
\ No newline at end of file
+${SCRIPTSDIR}/PywalDunst.sh
\ No newline at end of file
diff --git a/config/hypr/scripts/WallpaperRandom.sh b/config/hypr/scripts/WallpaperRandom.sh
index 13bc503..910093a 100755
--- a/config/hypr/scripts/WallpaperRandom.sh
+++ b/config/hypr/scripts/WallpaperRandom.sh
@@ -2,9 +2,12 @@
 
 # This script will randomly go through the files of a directory, setting it
 # up as the wallpaper at regular intervals
+#
+# NOTE: this script uses bash (not POSIX shell) for the RANDOM variable
 
 pywal_script=$HOME/.config/hypr/scripts/PywalSwww.sh
 pywal_refresh=$HOME/.config/hypr/scripts/Refresh.sh
+pywal_dunst=$HOME/.config/hypr/scripts/PywalDunst.sh
 
 if [[ $# -lt 1 ]] || [[ ! -d $1   ]]; then
 	echo "Usage:
@@ -18,7 +21,7 @@ export SWWW_TRANSITION_STEP=2
 export SWWW_TRANSITION_TYPE=random
 
 # This controls (in seconds) when to switch to the next image
-INTERVAL=300
+INTERVAL=900
 
 while true; do
 	find "$1" \
@@ -27,7 +30,7 @@ while true; do
 		done \
 		| sort -n | cut -d':' -f2- \
 		| while read -r img; do
-			swww img "$img" && $pywal_script && $pywal_refresh
+			swww img "$img" && $pywal_script && $pywal_refresh && $pywal_dunst
 			sleep $INTERVAL
 			
 		done
diff --git a/config/hypr/scripts/WallpaperSelect.sh b/config/hypr/scripts/WallpaperSelect.sh
index d748318..0d899a1 100755
--- a/config/hypr/scripts/WallpaperSelect.sh
+++ b/config/hypr/scripts/WallpaperSelect.sh
@@ -1,6 +1,9 @@
 #!/bin/bash
+
+SCRIPTSDIR="$HOME/.config/hypr/scripts"
+
 # WALLPAPERS PATH
-DIR=$HOME/Pictures/wallpapers
+DIR="$HOME/Pictures/wallpapers/"
 
 # Transition config
 FPS=30
@@ -25,13 +28,14 @@ menu() {
   for i in "${!PICS[@]}"; do
     # Displaying .gif to indicate animated images
     if [[ -z $(echo "${PICS[$i]}" | grep .gif$) ]]; then
-      printf "$i. $(echo "${PICS[$i]}" | cut -d. -f1)\n"
+      filename=$(basename "${PICS[$i]}" | sed 's/\.[^.]*$//')  # Remove file extension
+      printf "%s\n" "${filename//[[:digit:]]/}"  # Remove leading numbers
     else
-      printf "$i. ${PICS[$i]}\n"
+      printf "%s\n" "${PICS[$i]}"
     fi
   done
 
-  printf "$RANDOM_PIC_NAME"
+  printf "%s\n" "$RANDOM_PIC_NAME"
 }
 
 swww query || swww init
@@ -50,7 +54,7 @@ main() {
     exit 0
   fi
 
-  pic_index=$(echo "$choice" | cut -d. -f1)
+  pic_index=$(printf '%s\n' "${!PICS[@]}" | grep -E "\b${choice}\b")  # Get index based on choice
   swww img "${DIR}/${PICS[$pic_index]}" $SWWW_PARAMS
 }
 
@@ -62,5 +66,7 @@ fi
 
 main
 
-$HOME/.config/hypr/scripts/PywalSwww.sh &
-$HOME/.config/hypr/scripts/Refresh.sh
+${SCRIPTSDIR}/PywalSwww.sh &
+${SCRIPTSDIR}/Refresh.sh &
+sleep 1
+${SCRIPTSDIR}/PywalDunst.sh
diff --git a/config/hypr/scripts/WaybarLayout.sh b/config/hypr/scripts/WaybarLayout.sh
index dd5fc38..dbe0ee7 100755
--- a/config/hypr/scripts/WaybarLayout.sh
+++ b/config/hypr/scripts/WaybarLayout.sh
@@ -1,26 +1,42 @@
 #!/bin/bash
 
-CONFIG="$HOME/.config/waybar/configs"
-WCONFIG="$HOME/.config/waybar/config"
+set -euo pipefail
+IFS=$'\n\t'
 
+# Define directories
+config_dir="$HOME/.config/waybar/configs"
+waybar_config="$HOME/.config/waybar/config"
+scripts_dir="$HOME/.config/hypr/scripts"
+rofi_config="$HOME/.config/rofi/config-waybar-layout.rasi"
+
+# Function to display menu options
 menu() {
-    # List only files (excluding directories) in the directory and sort alphabetically
     options=()
     while IFS= read -r file; do
-        if [ -f "$CONFIG/$file" ]; then
-            options+=("$file")
-        fi
-    done < <(find "$CONFIG" -maxdepth 1 -type f -exec basename {} \; | sort)
-    
+        options+=("$(basename "$file")")
+    done < <(find "$config_dir" -maxdepth 1 -type f -exec basename {} \; | sort)
+
     printf '%s\n' "${options[@]}"
 }
 
+# Apply selected configuration
 apply_config() {
-    ln -sf "$CONFIG/$1" "$WCONFIG"
+    ln -sf "$config_dir/$1" "$waybar_config"
+    restart_waybar_if_needed
+}
+
+# Restart Waybar
+restart_waybar_if_needed() {
+    if pgrep -x "waybar" >/dev/null; then
+        pkill waybar
+        sleep 0.1  # Delay for Waybar to completely terminate
+    fi
+    "${scripts_dir}/Refresh.sh" &
 }
 
+# Main function
 main() {
-    choice=$(menu | rofi -dmenu -config ~/.config/rofi/config-waybar-layout.rasi)
+    choice=$(menu | rofi -dmenu -config "$rofi_config")
 
     if [[ -z "$choice" ]]; then
         echo "No option selected. Exiting."
@@ -29,10 +45,7 @@ main() {
 
     case $choice in
         "no panel")
-            if pgrep -x "waybar" >/dev/null; then
-                pkill waybar
-            fi
-            exit 0
+            pgrep -x "waybar" && pkill waybar || true
             ;;
         *)
             apply_config "$choice"
@@ -40,12 +53,10 @@ main() {
     esac
 }
 
-# Check if rofi is already running
+# Kill Rofi if already running before execution
 if pgrep -x "rofi" >/dev/null; then
     pkill rofi
     exit 0
 fi
 
 main
-
-~/.config/hypr/scripts/Refresh.sh &
diff --git a/config/hypr/scripts/WaybarStyles.sh b/config/hypr/scripts/WaybarStyles.sh
index 8a420f5..9395c52 100755
--- a/config/hypr/scripts/WaybarStyles.sh
+++ b/config/hypr/scripts/WaybarStyles.sh
@@ -1,26 +1,44 @@
 #!/bin/bash
 
-CONFIG="$HOME/.config/waybar/style"
-WCONFIG="$HOME/.config/waybar/style.css"
+set -euo pipefail
+IFS=$'\n\t'
 
+# Define directories
+config_dir="$HOME/.config/waybar/style"
+waybar_config="$HOME/.config/waybar/style.css"
+scripts_dir="$HOME/.config/hypr/scripts"
+rofi_config="$HOME/.config/rofi/config-waybar-style.rasi"
+
+# Function to display menu options
 menu() {
-    # List only files (excluding directories) in the directory and sort alphabetically
     options=()
     while IFS= read -r file; do
-        if [ -f "$CONFIG/$file" ]; then
+        if [ -f "$config_dir/$file" ]; then
             options+=("$(basename "$file" .css)")
         fi
-    done < <(find "$CONFIG" -maxdepth 1 -type f -name '*.css' -exec basename {} \; | sort)
+    done < <(find "$config_dir" -maxdepth 1 -type f -name '*.css' -exec basename {} \; | sort)
     
     printf '%s\n' "${options[@]}"
 }
 
+# Apply selected style
 apply_style() {
-    ln -sf "$CONFIG/$1.css" "$WCONFIG"
+    ln -sf "$config_dir/$1.css" "$waybar_config"
+    restart_waybar_if_needed
+}
+
+# Restart Waybar if it's running
+restart_waybar_if_needed() {
+    if pgrep -x "waybar" >/dev/null; then
+        pkill waybar
+        sleep 0.1  # Delay for Waybar to completely terminate
+    fi
+    "${scripts_dir}/Refresh.sh" &
 }
 
+# Main function
 main() {
-    choice=$(menu | rofi -dmenu -config ~/.config/rofi/config-waybar-style.rasi)
+    choice=$(menu | rofi -dmenu -config "$rofi_config")
 
     if [[ -z "$choice" ]]; then
         echo "No option selected. Exiting."
@@ -28,19 +46,9 @@ main() {
     fi
 
     apply_style "$choice"
-
-    # Restart relevant processes
-    for process in waybar dunst; do
-        if pgrep -x "$process" >/dev/null; then
-            pkill "$process"
-        fi
-    done
-
-    # Launch Refresh.sh in the background
-    ~/.config/hypr/scripts/Refresh.sh &
 }
 
-# Check if rofi is already running
+# Kill Rofi if already running before execution
 if pgrep -x "rofi" >/dev/null; then
     pkill rofi
     exit 0
diff --git a/config/rofi/config-long.rasi b/config/rofi/config-long.rasi
index 8911642..a1f33e6 100644
--- a/config/rofi/config-long.rasi
+++ b/config/rofi/config-long.rasi
@@ -104,7 +104,7 @@ entry {
 listview {
 	enabled:					 true;
 	columns:					 1;
-	lines:						 15;
+	lines:						 12;
 	spacing:                     4px;
 	dynamic:                     true;
 	cycle:                       true;
diff --git a/config/rofi/resolution/1080p/config-long.rasi b/config/rofi/resolution/1080p/config-long.rasi
index 8911642..a1f33e6 100644
--- a/config/rofi/resolution/1080p/config-long.rasi
+++ b/config/rofi/resolution/1080p/config-long.rasi
@@ -104,7 +104,7 @@ entry {
 listview {
 	enabled:					 true;
 	columns:					 1;
-	lines:						 15;
+	lines:						 12;
 	spacing:                     4px;
 	dynamic:                     true;
 	cycle:                       true;
diff --git a/config/rofi/resolution/1440p/config-long.rasi b/config/rofi/resolution/1440p/config-long.rasi
index 974b7ea..a6373e8 100644
--- a/config/rofi/resolution/1440p/config-long.rasi
+++ b/config/rofi/resolution/1440p/config-long.rasi
@@ -104,7 +104,7 @@ entry {
 listview {
 	enabled:					 true;
 	columns:					 1;
-	lines:						 15;
+	lines:						 12;
 	spacing:                     4px;
 	dynamic:                     true;
 	cycle:                       true;
diff --git a/config/waybar/style/Pywal.css b/config/waybar/style/Pywal.css
index fe18cbe..37618ae 100644
--- a/config/waybar/style/Pywal.css
+++ b/config/waybar/style/Pywal.css
@@ -8,7 +8,7 @@
     font-weight: bold;
     min-height: 0;
     /* set font-size to 100% if font scaling is set to 1.00 using nwg-look */
-    font-size: 98%;
+    font-size: 96%;
     font-feature-settings: '"zero", "ss01", "ss02", "ss03", "ss04", "ss05", "cv31"';
     padding: 1px;
 }
diff --git a/wallpapers/anime-girl-abyss.png b/wallpapers/anime-girl-abyss.png
new file mode 100644
index 0000000..6871f0e
Binary files /dev/null and b/wallpapers/anime-girl-abyss.png differ